It is primarily used for mechanical braking or deceleration in industries such as lifting, transportation, metallurgy, mining, ports, construction machinery, cable and hoisting equipment, wind turbines, and textile machinery.
Large braking force, low maintenance cost, with gasket wear automatic compensation device (braking torque stability), short response time.
Large installation tolerance:Maximum allowable brake disc surface runout: +0.2mm.- Perpendicularity deviation between the base and disc: ±0.4%.
Maximum deviation in the center distance between the brake disc and the base: ±2.5mm.
Remarks:
1)ST1SH, ST2SH, ST3SH, ST3SH-A, ST4SH, ST5SH, ST10SH, ST16SH, ST25S, ST40SH are only suitable for use as safety brakes, and can also be used as working brakes when the frequency of use is very low.
2)5SH, 450SH, 4SH, 3SH with gasket wear automatic compensation device (braking torque stability).
Ambient temperature:-20℃~50℃。
There must be no flammable or explosive gases in the surrounding environment.
The relative humidity of the air is not more than 90%.
The elevation of the site is in accordance with GB755-2008.
For outdoor environments exposed to rain, snow, or corrosive gases and media, anti-corrosion products should be used.
Online 
086-0391-7268818/7268868 